Almost every homeowner adores their garage. It isn’t just a place to park the car, but also a place to keep everything handy, such as a car jack, pump, rug, gardening supplies, and wood saws, and it also serves as a tool storage facility. However, because so many useful items end up in the garage, it is nearly impossible to avoid clutter. This could result in your garage looking messy and disorganized. It can also be aggravating for people who are easily irritated by untidiness and clutter. You can avoid such a sight by constructing a garage shelf – storage shelves always aid in the organization of space.
A DIY garage shelf will not only help you to organize your garage but could also make it easier to store your tools and supplies.
Floating Garage Shelves: A Do-It-Yourself Project
One of the 5 incredible DIY garage shelves is the floating garage shelf. The floating garage shelves are the best option if you need to make space below it for very heavy items. This fantastic garage storage shelf allows you to maximize storage space on your walls while also making full use of your garage floor space. Wood is commonly used in the construction of the DIY floating garage storage shelf.
The first step is to choose a material. You must choose between plywood, hardwood, and softwood. Hardwood is the sturdiest, most resilient, and most expensive of the three. Then you’ll have to gather the tools you’ll need to hang the wood on the wall, such as a screwdriver, a carpenter’s pencil, a chalk line, a tape measure, a hand saw, and a square.
Using your measuring tape, determine the size of your shelf. Begin at the top, measuring the distance between the first shelf and the ceiling. The distance could be 12 inches or less. It’s entirely up to you and what you want to put up there. The distance between the shelves can range between 12 and 15 inches. Your measurement is defined solely by you and the items to be stored.
Keep in mind that the distance between your shelves determines the number of shelves you’ll have: a larger measurement equals fewer shelves; a smaller measurement equals more shelves. Then, leave a big gap between the last shelf and the floor. It is assumed that you place the lighter objects on the top shelves and the heavier objects on the lower shelves in floating garage storage shelves to guarantee an even balance and avoid putting additional strain on your wall. Upon measuring, use your pencil to label the wall with a chalk line according to your measurements.
Using a handsaw cut and divide the woods according to the measurements for the construction. It’s time to start filling out the ledgers for the shelves. Position a 24 against the marked spot on the wall and secure it with a deck screw at both ends. Tighten the screw into every stud. Cut a 24 into small pieces and screw each piece into the wall for support.
Garage Shelves with Doors DIY
The DIY garage shelves with doors are a great way to keep a lot of treasures out of sight. It gives the appearance of a more organized garage, with every item closed behind the door. If you have children or pets running around, this is the best option for avoiding household dangers. The closed one organizes and appears tidy in your space. These DIY garage shelves with a door are best suited for bigger garages. It can hold heavier, larger items such as camping equipment, tools, toys, and even clothing. This project requires the following tools: a 4-in-1 screwdriver, an adjustable wrench, an air hose, chalk line, a circular saw, a compressor, a cordless drill, a drill bit set, framing square, a hacksaw, a level, a miter saw, a nail gun, safety goggles, a socket set, a speed square, a stepladder, and a stud finder.
After you’ve gathered your materials which include plywood for the door and hardwood for the shelf, you can start measuring the area for construction. Calculate the amount of space you’ll need for the garage shelf. Then you decide on the shelf measurements–the partition, the distance between shelves. You can construct the cabinet up to the ceiling. All that remains is to secure the ceiling frame to the studs and the ceiling.
Following that, you attach the upright to the wall and begin to construct your base, including the plywood floor, while holding to the upright and the wall. The most difficult aspect of this project for many people is getting the base square, level, and straight before screwing it into the wall. If your wall is straight, simply use Lag-screw to the frame and the studs. And then nail in your plywood to complete the base.
You’ll need a door track, rollers, hangers, and door guides to build the door. Install the door track. Check that the track sections are aligned so that the door can slide when they reach. The rollers are then screwed to the back of the door. Its hangers are then attached, and the door is tilted to hook the roller wheels. Install three doors on the outside and three on the inside. Then set them to readjust until they align. The installation is completed by placing door guides at the door’s feet. Where the doors overlap, the door guides should be installed.
Takeaway
For creative house owners, the garage is more than just a place to park the car; it’s also a place to store gardening tools, wood saws, and seasonal storage. However, if you don’t have space-saving shelving to keep these tools and supplies organized, this practice can turn your well-kept garage into a disorganized mess. Do-it-Yourself projects are enjoyable, especially when done with family and friends.
You can build your favorite DIY garage storage shelves from start to finish with less stress if you have the right guidelines and materials at your disposal. Just make sure you get the appropriate products and resources from the store. As well as, if you don’t want everything to fall out of place, use the exact measurements.
You may be interested in: “What is DIY? Definition and examples”