Do you own an Varla electric scooter? In that case, you will already be aware of how necessary it is to daily clean and maintain your electric scooter as it’s the case with pretty much all vehicles. Fortunately, due to the small size and simple machinery of the electric scooter, they are not that hard to clean and maintain.
Negligence towards your electric scooter may cause the electric scooter to stop working optimally and will shorten its lifespan. Untidy electric scooters look far less appealing as well. You wouldn’t want to go out with an electric scooter that looks unwashed. In this article, we will provide you with a brief guideline on how to clean your electric scooter.
What Stuff Do You Need to Clean Your Electric Scooter?
Before you start cleaning your electric scooter, you need to keep a handful of cleaning supplies nearby. With time, grease, dirt, debris, and grime will accumulate on your electric scooter, which simply rinsing your electric scooter with water won’t do the job.
- A cleaning towel
- A cleaning brush (you can also use a toothbrush or any old brush)
- A biodegradable soap appropriate for a vehicle
- A vaseline spray for lubrication
- A soft cleaning sponge
- A bucket of clean water
Before You Clean Your Electric Scooter
It’s highly recommended that you give your electric scooter a run or two before you start the cleaning process. This will heat the electric scooter and will get rid of all the excess water trapped inside the electric scooter’s internal machinery. Trapped water can cause a lot of problems in the long term.
Step-by-step Process of Cleaning an Electric Scooter
Cleaning your electric scooter is very easy and doesn’t take a lot of time. Here are the following steps that you need to follow.
1. Set up the Cleaning Procedure
The very first thing that you need to do is to ensure that everything is set in place. Make sure that you all have the cleaning supplies that we talked about. Check to make sure that your electric scooter’s power is switched off. You may also take your electric scooter outside before starting the cleaning process.
Exposure to outside air makes it easier for the water to dry from the electronic parts of the electric scooter. If you are looking for a quick clean, you can just put a little bit of water on the outer surface and clean it with a soft rag or a towel. This will come in handy on days you are too busy for a deep clean.
However, we recommend that you deep clean your electric scooter at least once a week. This will prevent dust and debris from accumulating on your electric scooter.
2. Clean the Outer Components
Get your water bucket and put your vehicle-friendly soap in it. Now dip the cleaning sponge in the soapy water and squeeze it as hard as you can. Keep squeezing until the sponge is dehydrated. If you were cleaning any other vehicle, then you would want the moisture to remain on the sponge, but since you are cleaning an electronic vehicle, you don’t have moisture making its way into the electric parts.
Now you should gently wipe the main outer parts of the electric scooter. This can include the handlebar, fenders, footrest, lights, forks, kickstand, and throttle levers. If you don’t want dirt and debris to stick to your sponge, then you should dip it into clean water after each wipe.
Keep in mind that you can use moisture if the areas you are cleaning are not electric. While using moisture, know where the battery is located to avoid wetting it. Now, get some clear water, dip your sponge on it, and rinse the soap off. If you end up wetting your electric scooter with droplets, you should wipe it with a clean rag.
Never use a hairdryer to clean the droplets as it may send all those droplets directly into the electronic parts of the electric scooter.
3. Wash Your Scooter Wheels
Now it’s time to wash your Scooter wheels. Wheels are quite delicate, and you need to be careful when you clean them. To clean them, get your soapy water, dip your sponge in it, and wash your wheels. Make sure to scrub the interior portion of your tires as well. Thoroughly clean the tires and use your brush to clean the wheel spokes.
Make sure that you are using a soft brush here, as a hard brush can damage the paint. You may also consider the choice of cleaning soap here, as soaps with heavy cleaning chemicals can be harmful to your tires.
Cleaning your tires is also the right time to check up for tears and other kinds of damages on your tires. If your scooter has air tires, then you should check its air pressure too.
4. Grease the Joints and Suspension
You may want to follow this step only when it’s needed. Your brake pad and other joints are just as important as other parts of your electric scooter. If the brake pad is allowed to dry, it can seriously compromise the long-term performance of the brake pad. So you should thoroughly lubricate it.
Read the manual before you lubricate it, as everyone’s braking system is built differently. Use a good vaseline spray on the braking pad. Use the lubricant in moderate amounts and apply it evenly across the surface of the pad. Don’t use too much lubricant as it can render the pad slippery.
Apply this vaseline spray to the joints as well. Lubricate ones that are near the suspension. You can also lubricate the wheel pins of the electric scooter.
Key Takeaways:
Periodic cleaning and maintenance of your electric scooter are necessary for prolonging the life span of your eclectic scooter. You can wash your electric scooter once every two weeks. Depending on the weather and the conditions of your daily route, you may want to clean it more often. Always make sure that you have the right tools before you clean it.
Interesting Related Article: “Things To Consider Before Buying An Electric Scooter“