It is very important to provide maintenance on the machine as well as the necessary repairs as time goes on, as they are equipment used for very demanding tasks and can easily break down.
We know this process, and our experience allows us to easily identify what is needed in machine maintenance. So far we have relied on the talent of those we work with and quality, fully certified parts. In this article, we will discuss the importance of a technical information database in heavy equipment maintenance.
When is it time to start the maintenance procedure?
It is important to carry out a general check and we call it first level technical analysis, where we usually make a complete visual evaluation of the machine to determine its state and give an accurate diagnosis. to advisors or managers. In this session, knowing the technical information database is very important because it is the basis for further decision making.
But what is the main reason why it is important to perform this technical analysis on the machine? Next, we will mention the most important ones:
-
Helps avoid accidents
One of the main reasons why machine technical analysis is important is that it helps to avoid accidents, as it allows identifying possible faults with the machine. This is fundamental because in this way, we solve the shortfall before the machine is used during the working day. In this way we avoid situations that not only endanger the projects we are working on or the machines we use, but also the lives of the workers. We will not be able to analyze the machine if we do not have a database of related technical information. That is impossible.
-
Increases engine life
As with any product in continuous use, machine maintenance is a way of updating this type of work tool. In order for the machine used to have a longer life, special care is needed. Performing machine maintenance will make your investment worth it and the machines you use will last longer than expected. Once again, maintenance cannot be done carelessly and before taking care of any heavy equipment we need basic information about the tool. And when we need this information, that means we need a technical information database.
-
Optimizes working time
Maintenance not only allows faults to be detected before they appear on the job site, but also allows machines that are in continuous use to be left as good as new. This will allow operators to do work more quickly and efficiently, optimizing uptime.
Already having the technical analysis of the first level, we can proceed to the second level and it is here that we have gone into detail in the measurement, adjustment, speed, noise and more elements which can be repaired in time and avoid mechanical failures affecting the operation. In the second level of technical analysis, things get more detailed and we will be dealing with certain codes (which are embedded in the components in the machine). Of course that is impossible without owning or knowing a technical information database.
It is recommended to start with the first level of technical analysis, which in this case is carried out by experienced technicians. If your machine is outside these limits, you will bear the transportation costs of a specialized technician.
You can visit www.epcatalogs.com. The site is a reference for us when we experience problems in repairing and maintaining the machine.
Interesting Related Article: “5 Tips on Construction Equipment Management and Maintenance“