Vograce holographic stickers are super fun to use. Their shiny, colorful designs can add a vibrant touch to almost anything—from water bottles to laptops, notebooks, and more! But if you’ve ever tried sticking a sticker onto a surface and ended up with those annoying air bubbles, you’re not alone.
Applying stickers without bubbles can be tricky, but it’s not impossible. In this guide, we’ll provide easy, step-by-step tips on how to apply Vograce holographic stickers smoothly and without air bubbles.
1. Start With a Clean Surface
Before you apply the sticker, it’s essential to make sure the surface is spotless. Dirt, dust, or even tiny particles can get trapped under the sticker, creating bumps and bubbles.
- What to do: Use a damp cloth or rubbing alcohol to gently clean the surface where you want to apply the sticker. Make sure it’s completely dry before moving to the next step.
- Pro tip: Avoid using oily cleaners like furniture polish or glass cleaners, as they might leave a residue that prevents the sticker from sticking well.
2. Plan Your Placement
Once your surface is clean, don’t rush to peel the sticker off. It’s a good idea to plan exactly where you want to place it. Once the sticker is on, removing and reapplying it without damaging it is tough.
- What to do: Hold the sticker over the area to understand how it will look. If necessary, mark the corners lightly with a pencil.
- Pro tip: If you’re applying multiple stickers, plan out the layout first so you don’t accidentally place one in a way that makes the others look uneven.
3. Peel Slowly
Now that you’ve planned your placement, it’s time to peel the sticker. This step can make or break your bubble-free application.
- What to do: Instead of immediately peeling off the entire backing, peel off just one corner. This allows you to have more control as you position the sticker.
- Pro tip: Use your fingernail or a small flat object, like a credit card, to slowly lift the corner of the backing paper without bending the sticker.
4. Use the “Hinge Method”
The hinge method is a great trick for reducing air bubbles. It gives you more control over the sticker application and helps press out any air that tries to get trapped underneath.
- What to do: Stick the exposed corner onto your surface and press it down smoothly. Now, slowly peel away the rest of the backing while pressing the sticker down firmly as you go, working your way from the corner to the opposite side.
- Pro tip: Always work from one side of the sticker to the other, never from the center out. This helps push air away as you apply the sticker.
5. Smooth As You Go
To ensure your Vograce holographic sticker goes on perfectly, smooth it out as you apply it. This helps prevent air bubbles from forming under the sticker.
- What to do: Use a flat object like a credit card, squeegee, or even the side of your hand to gently smooth out the sticker. Start from where you’ve already applied the sticker and work outward in a slow, steady motion. Press the sticker down firmly to remove any trapped air as you smooth.
- Pro tip: Don’t rush this process! Going slow and steady is the key to avoiding bubbles.
6. Check for Bubbles
Even when you’re super careful, small bubbles can still sometimes appear. But don’t worry—there’s a way to fix that.
- What to do: If you spot small air bubbles after applying the sticker, use a pin or a needle to poke a tiny hole in the bubble’s center. Then, press the bubble down and smooth it out with your finger or a flat tool.
- Pro tip: For larger bubbles, use the pin method on the bubble’s outer edge instead of the center. Then, gently press the air out toward the hole.
7. Let It Set
After you’ve applied your sticker, give it time to set and bond to the surface fully.
- What to do: After applying the sticker, leave your item alone for a few hours. This allows the adhesive to fully adhere, giving you a smooth, long-lasting result.
- Pro tip: Keep your item in a cool, dry area while the sticker sets. Extreme heat or moisture might affect the adhesive.
Final Thoughts
Applying Vograce holographic stickers without air bubbles doesn’t have to be tricky. By taking a few simple steps—cleaning your surface, using the hinge method, and smoothing as you go—you can achieve a perfect, bubble-free application every time.
Whether you’re decorating a phone case, water bottle, or laptop, these shiny stickers will look even better when they’re applied smoothly.
To get your holographic stickers, head to Vograce and grab an amazing discount today!