A small roof leak can cause major damage to a home leading to home interior issues, such as waterlogged attic insulation and ruined floors. Depending on the extent of damage, a DIY approach may or may not work. To avoid the hassle, you should call a professional roofing company in Redding because it is a labor-intensive job. Repairing a leaking roof is necessary for the maintenance of your home. Proper and regular roofing maintenance will extend your property life and maximize the value of your investment.
How to Find a Roof Leak?
A roof leak can be complicated to find and challenging to fix. Sometimes, it is easy to find from your home exterior when there is damage by a rainstorm. Common areas for roof leaks include roof valleys and roofing sections where debris accumulates. You can find leaks on flashing under gutters, below dormer windows, and along the peak of your roof.
More Tell-tale Signs to Look For:
- Water spots on your ceiling
- Holes or tears in flashing
- Dripping sounds
- Rotted wood
- Dark mold
- Wet spots around your fireplace
Repairing Roof Leaks
The first step involves finding the source of a leak. If you find any drips, place a bucket under them to avoid more spillage on the floor.
Patching a roof leak using a DIY approach gives you a temporary fix. You will need some heavy plastic polyethylene sheeting that is large enough to cover the leaking section of the roof from the bottom to the top. It further requires knowledge and skill in wrapping and stapling. Doing a DIY repair can be overwhelming and may require you to call roof leakage repair experts.
Repairing The Leak From Inside
Discover the leak source and create a temporary patch using plywood, extra shingles, and roofing tar.
Spread roofing tar around the leak from the inside using a putty knife or a similar tool, then set the plywood or shingle on top of the tar and spread more tar around the patch’s borders to keep it in place.
It is a temporary fix until the experts arrive with a permanent roof leak repair solution.
Leaks around plumbing vent boots can be fixed by replacing the boots. If you find nails or screws stripped, you can replace those too.
Step flashing repair: It is possible to replace step flashing, the reinforcement that seals the joints around your roofs, such as those surrounding vents and chimneys. If it has rusted through or not secured, you can pry the shingles and the nails holding them in place loose and add galvanized metal flashing underneath.
You should hire a roofing contractor if you cannot locate the source of your roof leak but still notice signs of water entering your home or if you cannot repair the leak. Consulting experts offering residential and commercial roofing in Redding ensure a permanent solution. The DIY approach is fine until it leads to more damage. Roof leak repair can be difficult and time-consuming. To prevent leaks, the intricately intertwined parts of roofs must coordinate, and the work requires a lot of climbing and hauling.
You may be interested in: Are Flash Keys a Reliable Way to Back Up Your Data?