Three common causes of an inoperative gas stove burner

A gas stove burner that doesn’t work can disrupt dinner plans, but luckily, there’s usually a simple solution—wondering how to fix a gas stove burner that won’t light? Checking your power sources and cleaning everything well are examples of routine maintenance. Contaminated burner components may need cleaning to allow gas to flow or ignite. Troubleshoot your gas stove burner malfunction with the troubleshooting tips outlined in this article. Also, you can call an oven repair technician in Montreal or any other city.

Check the power and gas connections

Although your stove uses gas as a heat source, the burners won’t light without electricity. The igniter uses an electric spark to ignite the gas, and the electricity powers the other functions of the appliance.

If your gas stove burner does not light, perform the following electrical and gas checks:

  • Check the gas connection: If none of the burners light up, make sure that the hob is properly connected to the gas supply system of the house. The valve on the gas line should also be open, allowing the gas to flow.
  • Make sure the stove is properly plugged in: Make sure the stove’s electrical cord is fully plugged into a serviceable outlet. Avoid using an extension cord to power the stove, as it cannot safely carry the necessary voltage.
  • Check for tripped circuit breakers: Check for tripped circuit breakers in the circuit breaker in your home and reposition them if necessary.

How to clean gas stove burners

Gas stove burners have many components that get dirty from spills, splashes, grease and food particles. These particles can clog components, preventing gas flow or gas ignition. Monthly burner cleaning can prevent clogging and restore performance if you find your gas stove burner is not working properly.

The gas stove burner is not burning

Follow these steps to clean the burner cover and head, igniter and spigot:

Burner cap and head:

  1. Remove the lid and burner head by lifting them straight up.
  2. Soak both parts in a solution of hot water and dish detergent for 20-30 minutes.
  3. Gently clean stubborn stains with a toothbrush.
  4. Allow the cap and head to air dry completely before replacing them.


  1. Remove the cap and burner head.
  2. Gently clean with a soft-bristled toothbrush or soft cloth to remove debris.

Hole Rod:

  1. Remove the cap and burner head.
  2. Gently clean the spigot and its bore with a soft-bristle brush.
  3. Use tweezers to remove blockages in the bore.

Stove burner malfunction

If your stove burner is still not working, chances are the igniter or spark electrode has failed. By receiving an electrical charge, the igniter creates a spark that ignites the gas flowing through the burner opening. If the igniter spark is too weak or missing, the burner will not light.

How can you tell if your stove’s igniter is out of order? Observe the way it tries to light the burner. If it doesn’t produce a spark or the spark can’t ignite the gas, the igniter probably needs to be replaced.

If you can’t solve the problem yourself, schedule prompt and professional service ahead of time. Contact a local professional, such as Superiorapplianceservice. The experts can fix a non-functioning gas stove burner or perform any gas stove repair.

Interesting Related Article: “What is the difference between Infrared and Induction cookers?